Find us on Google+ Material Safety Data Sheet (MSDS) | Odie's Oil
  Loading... Please wait...

Our Newsletter


Buy

Odie's Oil 

Now! 

made-in-usa-seal.jpeg

Win a FREE Jar of Odie's Oil!

woman5-1.gif

Click Here To See How 

MSDS Odie's Oil

Material Safety Data Sheet for Odies Oil

Click HERE for a printable pdf

Manufactured by:

Odysseus Cornwalls Outstanding Oils and Waxes

Phone: 850-266-7616

24 Hour Emergency Phone:

Date of Prep: October 14, 2007

Section 1. - Identification:

A proprietary blend of all-natural no-VOC FDA approved food safe oils and waxes. This product is manufactured without the use of solvents, heavy metals, chemical hardeners, or drying agents. MANUFACTURED EXCLUSIVELY BY ODYSSEUS CORNWALLS OUTSTANDING OILS AND WAXES.


HAZARD IDENTIFICATION SYSTEM:

Section 2. – Hazardous Ingredients:

Odies Oil is not a hazardous material under current department of labor definitions. 


 

Section 3. – Physical Data:

Boiling Range:

N/A

Vapor Density

Heavier than Air

Percent Volatile by Volume:

N/A

Weight per Gallon: 

Approximately 7.0 lbs.

Appearance:  

Amber

Specific Gravity @25°C:

.923 – .93

 

 

Section 4. – Fire and Explosion Hazard Data:

Flammability Classifications:

DOT - Not Regulated

Flash Point:

ABOVE 250 DEG F

Extinguishing Media:

Sand

Unusual Fire

& Explosion Hazards: 

Keep containers tightly closed. Isolate from heat, electrical equipment, sparks and open flame. As with all vegetable oils, rags, steel wool or waste soaked with oil may spontaneously catch fire if improperly stored or discarded. Be sure to place any oil-soaked rags or paper in a sealed, water-filled metal container.

 

Section 5. – Health Hazard Data

Effects of Overexposure:
A mild dermatitis may occur with prolonged contact if individual is sensitive; possible nausea upon ingestion. 
No known health hazards.

Emergency and First Aid Procedures:
Wash thoroughly with soap and water.

 

 Odies Oil MSDS - Page 2 of 2                                                                                                 Dated: October 2007

 

Section 6. – Reactivity Data

Stability: 

Stable

Conditions to Avoid: 

Caustic Amines, Alkanolamines, Inorganic Acids

Hazardous Decomposition Products: 

Unknown if any

Hazardous Polymerization: 

Will not occur

 

Section 7. – Spill or Leak Procedures

Steps to be taken in case material is released or spilled:
Confine with sand or other inert media. Return to containers. Dispose in accordance with local, state, & federal regulations.

 

Section 8. – Special Protection Information

Respiratory Protection: Not normally needed.

Ventilation: Normal plant ventilation.

Protective Gloves: Not normally needed, but in case of sensitivity use: Rubber, neoprene, latex or other.

Other Protective Equipment: Not normally needed.

Eye Protection: Goggles as guard against splashing.


Section 9. – Disclaimer and/or Comments

The information in this MSDS was obtained from sources which we believe are reliable. However, the information is provided without any representation or warranty, expressed or implied, regarding its accuracy or corrections.

The conditions of handling, storage, use and disposal of the product are beyond our control and may be beyond our knowledge. For this and other reason, we do not assume responsibility and expressly disclaim liability for loss, damage, or expense arising out of or in any way connected with the handling, storage, use of disposal of the product.